DMX cable by premium manufacturer Sommer Cable
These premade cables are the perfect choice for the transmission of the 110 ohms AES/EBU DMX512 data format.
Important note: the use of a standard microphone cable is not recommended due to data and information losses (caused by the skin effect). In the lighting domain data losses cause a total jam with signal transmissions or the control of scanner systems.
The very affordable price of this cable should make it easy to switch from a standard microphone cable to a proper AES/EBU cable. Our AES/EBU cable guarantees the error-free data transfer even over longer distances of up to 100 metres. We use the BINARY 234 AES/EBU MKII AES/EBU cable with 100 % shielding and the HICON XLR connectors.
High-quality data cable
AES/EBU- and DMX-conformant, highly flexible
Very good shielding through the use of copper spiral shielding and a fleece vaporized with aluminum
Extremely robust with an especially strong jacket
Only a little more expensive than a standard microphone cable
For networking of scanners, lighting units, digital mixing boards, etc.
For indoor and outdoor installation
For connection of digital audio amplifiers, DAT-recorders, etc.
Made in Germany
(2LI2YS 0.34 mm²) (ST)CY
PVC 7.0 mm
FRNC: 5.6 mm
No. of inner conductors:
2 x 0.34 mm² (AWG 22)
Copper strand per conductor:
19 x 0.15 mm
Foam/skin-PE 1.50 mm
copper spiral shielding + aluminum steamed fleece
-25° C to +70° C
Fire load per m:
0.17 kWh (520-0051 F:0.23 kWh)
Weight per 1 m:
20 m roll
Capac. cond./cond. per 1 m:
Capac. cond./shield. per 1 m:
Cond. resistance per 1 km:
Insulation resist. per 1 km >1 Gohms
HICON HI-XCF3N-BLK XLR female, black
HICON HI-XCM3N-BLK XLR male, black