Apple iPad Pro 11" 2018 Actieve houder met 12V USB plug
Afbeeldingen
Sla de afbeeldingen over
Artikel vergelijken
- Back Cover
- Kunststof
Productbeschrijving
Active holder with cig-plug
With tilt swivel. With USB cable.
The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPad Pro in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
Item no: 721094
EAN: 7320287210941
Width: 255 mm
Height: 199 mm
Depth: 40 mm
Volume: 2030 cm³
Weight: 367 g
Item no 721094 fits:
Item no 721094 fits:
Apple iPad Air 4th Gen (A2072, A2316, A2324, A2325) (For all countries)
Apple iPad Pro 11 2018 (A1980, A2013, A1934, A1979) (For all countries)
Apple iPad Pro 11 2020 2nd Generation (A2068, A2230) (For all countries)
Apple iPad Pro 11 2021 3rd Generation (A2301, A2459) (For all countries
Geschikt voor:
Actief Sig-plug
Apple iPad Pro 11
With tilt swivel. With USB cable.
The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPad Pro in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
Item no: 721094
EAN: 7320287210941
Width: 255 mm
Height: 199 mm
Depth: 40 mm
Volume: 2030 cm³
Weight: 367 g
Item no 721094 fits:
Item no 721094 fits:
Apple iPad Air 4th Gen (A2072, A2316, A2324, A2325) (For all countries)
Apple iPad Pro 11 2018 (A1980, A2013, A1934, A1979) (For all countries)
Apple iPad Pro 11 2020 2nd Generation (A2068, A2230) (For all countries)
Apple iPad Pro 11 2021 3rd Generation (A2301, A2459) (For all countries
Geschikt voor:
Actief Sig-plug
Apple iPad Pro 11
Productspecificaties
Wij vonden geen specificaties voor jouw zoekopdracht '{SEARCH}'.
Geschikt voor
- Geschikt voor merk
- Apple
Kenmerken
- Type hoesje
- Back Cover
- Materiaal
- Kunststof
- Kleur
- Zwart
Eigenschappen
- Regelbare standen
- Nee
- Inclusief auto-wake functie
- Nee
Productinformatie
- Merk
- Brodit
-
Verpakkingsinhoud
- Brodit houder, montagehandleiding en 4 schroefjes.
- Verpakkingsgewicht
- 100 g
- MPN (Manufacturer Part Number)
- 721094
- EAN
- 7320287210941
Overige kenmerken
- Mate van valbescherming
- Geen extra valbescherming
- Verpakking breedte
- 15 cm
- Verpakking hoogte
- 6 cm
- Verpakking lengte
- 30 cm
EAN
- EAN
- 7320287210941
Prijsinformatie en bestellen
De prijs van dit product is 84 euro en 95 cent.
Op voorraad
Nu besteld, dinsdag in huis
Verkoop door
PDAplus.nl
- Bestellen en betalen via bol
- Inclusief verzendkosten, verstuurd door PDAplus.nl
- 30 dagen bedenktijd en gratis retourneren
- Wettelijke garantie via PDAplus.nl
Shop dit artikel
Anderen bekeken ook
Vaak samen gekocht
Rapporteer dit artikel
Je wilt melding doen van illegale inhoud over dit artikel:
- Ik wil melding doen als klant
- Ik wil melding doen als autoriteit of trusted flagger
- Ik wil melding doen als partner
- Ik wil melding doen als merkhouder
Geen klant, autoriteit, trusted flagger, merkhouder of partner? Gebruik dan onderstaande link om melding te doen.