walimex pro Aptaris Canon C100/300 Action-Set
Afbeeldingen
Artikel vergelijken
-
Schouderstatief
Schouderstatief
Een tripod heeft 3 poten en is af te stellen op hoogte. Een monopod heeft maar 1 poot en is erg geschikt voor selfies. Een ministatief is vanwege zijn lage gewicht handig voor op reis. Een schouderstatief plaats je op je schouder. Een stabilisator zorgt ervoor dat je camera stabiel blijft tijdens beweging. Een slider is een rails waar je de camera op plaatst om je camera stabiel te houden. Een lampstatief is geschikt voor studioverlichting.
Productbeschrijving
- Cage en Rig in één systeem
- In hoogte verstelbare Aptaris Universal XL Cage-systeem met XXL Adpater
- Geschikt voor Canon C100/300
- Met geleider, handvat en schouder module
- Made in Germany
- Gemaakt van extreem licht aluminium vliegtuigen
Inhoud
- Aptaris Canon C100/300 Action-Set, contains 1x Aptaris Universal XL, 1x Aptaris Universal XXL adapter,1x Aptaris Rod module, 1x Aptaris handle module, 1x Aptaris shoulder module, 1x Adapter 1/4 inch to 3/8 inch
Omschrijving
From Cage to Rig in one system: The walimex pro Aptaris Canon C100/300 Action-Set contains all components to extend your Cage to a Rig with just a few flicks of your wrist and thereby gives you the opportunity to achieve professional filming results. The set includes the height adjustable Cage system Aptaris Universal XL incl Aptaris Universal XXL adapter and adapter 1/4 inch to 3/8 inch and thereby suitable for Canon C100/300, as well as the Aptaris rod, handle and shoulder module. Due to the extremely high flexibility and operability, the set is suitable for a vast amount of different applications. Depending on requirements, the Action-Set can obviously also be extended with a vast range of accessories. All components of the Set were developed and manufactured in Germany and impress with highest precision in workmanship. Materials used are light aircraft aluminium and stainless steel – for extreme longevity and robustness.
Aptaris Universal XL
walimex pro Aptaris Universal XL matches all common cameras, such as e.g. Panasonic GH-3, Nikon D800, Canon 5D Mark III. In short, for all cameras whose flash shoe and tripod thread are positioned on one axis and do not exceed or fall short of the inside measurements of the cage. Thank to the included XXL adapter, Aptaris Universal XL is also suitable for bigger cameras such as Canon C100/300. Aptaris is simply fastened to the camera by the flash shoe of the camera and the camera screw fitting (1/4-inch thread). The adjustability of the cage in height via four Allen screws is an absolute highlight. This makes the version suitable for a vast range of cameras. Two small hooks on the camera mount, which can be individually adapted to the camera, ensure absolutely skid-free mounting.
Due to its vast number of 1/4 inch threads on all sides as well as a 3/8 inch thread on the bottom side, a vast amount of accessories, like microphones or LED-lights, can be mounted, just as desired. The adjustable handle, which can be mounted at the top, the bottom or at the sides, just as required, provides additional flexibility in use. This enables also filming near ground level. Due to an adapter plate with Manfrotto PL 501 standard, you can also mount Aptaris on a Manfrotto tripod. Access to battery compartment, memory card etc. is in any case ensured.
Aptaris Rod module
For even higher flexibility walimex pro offers a rod module for the innovative walimex pro Aptaris cage system. The rod module is simply mounted to the main unit by means of an innovative quick-action lock solution. For professional results you can attach further accessories, like e.g. Follow Focus or a Matte box to shield off sun light, to the 15 mm Ø" rods. The rod module also offers highest flexibility in use: It is adjustable in height and, with a thread on the bottom side, it can be mounted on a tripod or a quick-release plate.
Aptaris handle module
The Aptaris handle module not only extends your Aptaris Cage, but can also be combined with numerous common rigs. The module is thereby simply mounted to the rods of the rig. Due to their ergonomic design, the handles feel particularly comfortable in your hand. Suitable for rods with a 15 mm diameter (industrial standard).
Aptaris shoulder module
The Aptaris shoulder module not only extends your Aptaris Cage, but can also be combined with a vast number of common rigs. The module is thereby simply mounted to the rods of the rig. Suitable for rods with a 15 mm diameter (industrial standard). The shoulder module can be individually adapted. Soft shoulder pads additionally ensure highest carrying comfort in any situation. The shoulder module is suitable for the left and right shoulder.
Outside measurements (Height/Width/Depth)
101-155mm/ 104mm/72mm
Inside measurements (Height/Width/Depth)
81-133mm
Weight incl. handle
370g
Aptaris Rod module
Rod diameter
15 mm
Dimensions (height / width / length)
63 mm / 93 mm / 250 mm
Weight
330 g
Aptaris Handle module
Dimensions (height / width / length)
120mm/240mm/29mm
Rod diameter
15mm
Weight
370g
Aptaris shoulder module
Dimensions (height / width / length)
93mm/190mm/16mm
Rod diameter/length
15mm/300mm
Weight
400g
Productspecificaties
Algemene kenmerken
-
Type statief
- Schouderstatief
Productinformatie
- Flexibele poten
- Nee
-
Verwijderbare middenkolom
- Nee
Accessoires
- Inclusief handvat
- Ja
Productinformatie
- MPN (Manufacturer Part Number)
- 20215
- EAN
- 4250234502153
Overige kenmerken
-
Geschikt voor type camera
- Systeemcamera
EAN
- EAN
- 4250234502153
Je vindt dit artikel in
- Geschikt voor type camera
- Systeemcamera
- Type statief
- Schouderstatief
Prijsinformatie en bestellen
Rapporteer dit artikel
Je wilt melding doen van illegale inhoud over dit artikel:
- Ik wil melding doen als klant
- Ik wil melding doen als autoriteit of trusted flagger
- Ik wil melding doen als partner
- Ik wil melding doen als merkhouder
Geen klant, autoriteit, trusted flagger, merkhouder of partner? Gebruik dan onderstaande link om melding te doen.